AMP 205 AV HDMI Audio De-Embedder & Amplifier 2x50W @ 4 Ohm

Item No.: LDAMP205AV

Series: TICA

Versions:

Professional mini amplifier with HDMI Audio de-embedder

HDMI In- and Out and stereo line outputs

2 x 50W Class-D amplifier with low impedance outputs

Compact form factor and passive cooling

Remote source select, standby and volume control

External 100-240V power supply

Mounting plates for flexible inconspicuous installation, even above suspended ceilings

Auto standby to save power

Balanced line output and loudspeaker output on terminal blocks

User-friendly front panel with signal, clip and protection LEDs.

Optional rack tray for combining with other TICA® series products

Buy

Search now

Contents and categories

Display all

Contents and categories

Series

Search suggestions

Display all results

Professional mini amplifier with HDMI Audio de-embedder

HDMI In- and Out and stereo line outputs

2 x 50W Class-D amplifier with low impedance outputs

Compact form factor and passive cooling

Remote source select, standby and volume control

External 100-240V power supply

Mounting plates for flexible inconspicuous installation, even above suspended ceilings

Auto standby to save power

Balanced line output and loudspeaker output on terminal blocks

User-friendly front panel with signal, clip and protection LEDs.

Optional rack tray for combining with other TICA® series products

Description

The LD Systems AMP 205 AV is the perfect complement to deliver sound from an AV system. Just connect your video source and it extracts the audio and delivers stereo audio to your loudspeakers. An HDMI pass though connection makes connection to your display device easy.

Powered by a highly efficient 2x50W Class-D amplifier, it features 4 Ohm outputs and a user-friendly front panel, equipped with signal, clip, and protection LEDs.

Its tiny form factor (142 x 44 x 222) and included mounting plates allow it to be installed discreetly almost anywhere; behind screens, under tables or even in air-handling spaces and above plenum ceilings. Alternatively, it fits into 1/3 19 inch rack. Use the optional rack tray to slot up to four TICA® series products alongside each other and build a system to your exact requirements, using minimal rack space.

The AMP 205 AV uses an external 24V power supply. Terminal block connections for the analogue outputs and GPIO connections make wiring easy.

Remote control connectivity for third-party devices lets you select between HDMI input and HDMI out (ARC). You can also adjust volume on either channel, and put the power amplifier into standby mode at any time, ideal for when the amp is hidden away. Optional auto-standby saves power when no audio is running.

The perfect solution for professional installers and users looking to deliver higher performance audio for the video systems.

Specifications

General

Product type

Installation power amplifier and HDMI Audio-Deembedder

Line inputs

Line outputs

Line output connectors

Balanced line outputs, Pitch 3.81 mm terminal block (3-pin)

Loudspeaker outputs

2 with output mode selector (Stereo / High Power Mode)

Cooling

Convection

HDMI specifications

Supported color format

RGB, YUV420, YUV422, YUV444

Max. data rate

48 Gbit/s

Resulution range

Up to 4K2K 60Hz

Color bit depth

8 bits per color

Chroma Sampling

4 : 4 : 4

HDMI standards

HDCP 1,4 - 2,3, HDMI 2,1

Number of HDMI Inputs

HDMI Input Connector

1 female HDMI type A

Number of HDMI Outputs

HDMI Output Connector

1 female HDMI type A

Standby wake up threshold

7 seconds

Line output

THD + N

> 0.006%

SNR (A)

> 100 dB

Frequency range

15 Hz - 20 kHz (-0,5 dB)

Output level

+15 dBu (0dBFS / 1kHz)

3rd Party Control

Main Volume (VCA)

10 kOhm (Linear Taper) External Potentiometer, Pitch 3,5 mm terminal block (3-Pin)

Source select

Pitch 3,5 mm terminal block (3-Pin)

Power Standby

External momentary button, Pitch 3.5mm terminal block (2-pin)

Amplifier Output

Type

Class D

Output modes

High Power Mode (ST/ HPM), stereo

Amplifier Outputs

2- channel (STEREO) / 1-Channel (HPM)

Connector

4 - pin terminal block (pitch 5.08mm)

THD + N

< 0.05 %

SRN ( A )

< 100 dB

RMS Power ( W )

1 x 100 W @ 2 ohm (Continuous sine wave 1 kHz 10 sec), 2 x 50 W @ 4 ohm (ST)

Minimum load impedance

2 Ohms (HPM), 4 Ohm (ST)

Frequency response

15 Hz - 20 kHz (-0,5 dB)

Protection circuits

DC protection, over-current, Short circuit, thermal overload

Power supply

Type1

External SMPS

Operating voltage

100 V AC - 240 V AC, 50 - 60 Hz

Fuse

Power Supply Secondary

24 V DC

Secondary Current

3,5 A

Secondary connector

Terminal block 5.08 mm 2-pole

Primary Connector

IEC

Safety class

Class 3

Max. power consumption

155 W ( 0 dBFS, sine 1 kHz with 2 x 4 Ohm load )

Idle power consumption

6.8 W

Standby power consuption

< 1.5 W

Mains Inrush Current

2.4 A @ 230 V AC

Operating temperature ( non-condensing )

0°C - 40°C; < 85% humidity, non condensing

General data

Material

Plastic Front panel, Steel chassis

Dimensions (W x H x D) ( height with rubber feet )

142 mm x 53 mm x 222 mm

Weight

1,1 kg

Accessories (included)

External SMPS, Mounting plates for surface mount applications, Terminal blocks for electrical connections.

Name	Category	Type	File size
User manual	Manual	pdf	2 MB
Tender documents	Tender Specifications	zip	162 KB
Highlights DJ & musician	Catalog	pdf	4 MB
Highlights installations	Catalog	pdf	7 MB
Product images	Image files	zip	-